






01 Normal Standard
WPC Wall Cladding | 01 Classic Normal Standard — T*Home
Wholesale WPC wall cladding, China manufacturer: 01 fluted 219 mm and flat 148/156 mm panels, 10 standard colours. MOQ 100 m² per colour, free samples, 15–25 days. Quote within 24 hours.
Specifications
- Fluted 219 × 26 mm
- Ribbed face, 4 hollow chambers, tongue-and-groove joint (Custom colour / Dark Grey / Custom colour)
- Flat 148 × 21 mm
- Plain face, tongue-and-groove joint; same shape and design as the 156 mm panel
- Flat 156 × 21 mm
- Plain face, tongue-and-groove joint; same shape and design as the 148 mm panel
Wholesale WPC wall cladding from a China manufacturer: first-generation fluted and flat panels in 219, 148 and 156 mm, 10 standard colours. MOQ 100 m² per colour, free samples, 15–25 days per 20 ft container.
What is 01 WPC wall cladding?
First-generation (Normal Standard) outdoor WPC wall cladding — wood plastic composite panels — from ANHUI FENGZHIDA NEW MATERIAL TECHNOLOGY CO., LTD (T*Home), a China WPC manufacturer. Two profiles photographed so far: Fluted 219 × 26 mm, a ribbed panel with four hollow chambers, and Flat 148 × 21 mm and 156 × 21 mm, a plain-face panel in the same shape and design. The fluted panel is shown in Dark Grey and in two custom colours (not on the standard 10-colour card); the flat panel is shown in three custom colours (not on the standard 10-colour card). Wall cladding is decorative, not load-bearing — it is fixed with screws at the panel joints, no clips.
Where can 01 wall cladding be used?
Exterior facades, garden walls and balcony walls where a wood-look finish is wanted. For decking in the same range, see 01 WPC decking.
What colours and finishes are available?
Ten standard colours on the shared 01/02 colour card: Yellow, Dark Grey, Black, Light Grey, Red Brown, Dark Coffee, Teak, Light Coffee, Maple Red, Rosewood. Post-embossed finishes for 01: H1 Knotwood, H2 Annual Rings, H3 Straight Grain. The colours in the photos are Dark Grey and custom colours — confirm the colour and finish on a free physical sample before ordering in bulk.
How is 01 wall cladding installed?
Fix the battens to the wall first with expansion anchors (nylon plug + screw): drill through the batten into the wall, tap in the plug, drive the screw down. No panel goes on until the battens are fixed and level. Leave a ventilated cavity of at least 20 mm behind the panels, with a 10 mm gap at the bottom and top of the run. Panels are fixed with screws at the seam — drive an A2 stainless steel screw through the tongue at the joint into the batten, one screw at every batten crossing; the next panel slides over the tongue and covers the screw heads. No clips are used: wall cladding is decorative, not load-bearing, so screws at the seam are all it needs. Use silver screws on light panels and black screws on dark panels. Close the edges with L skirting, fixed with screws driven directly through the trim face. Full step-by-step instructions: T Home Wall Cladding Installation Guide.
How to choose between Fluted and Flat?
Choose by profile first: Fluted 219 mm gives a ribbed, shadowed face; Flat 148 and 156 mm give a plain, smooth face in the same shape and design — the two flat sizes differ in width only. Both profiles fix the same way, screwed at the seam with no clips. Check the end-section photos before ordering battens, screws and trims.
What are the wholesale terms?
MOQ 100 m² per colour (decking and cladding). Samples are free. Lead time 15–25 days for a 20 ft container; urgent orders can be confirmed case by case. Custom mould design, size, length, packaging, colour, pattern, logo and sample boxes available. Payment 30% T/T deposit, 70% T/T before delivery; L/C also accepted. FOB / CIF / DDU / DDP from Shanghai, Qingdao or Ningbo. No prices on the page — quote on enquiry.
How to get a quote or free samples?
Send the model, colour and quantity and we will reply with a quote within 24 hours — or request free samples first and confirm the colour and finish on the real board before ordering in bulk. Contact: eva@thomestyle.com, WhatsApp / WeChat +86 15956288470. How to care for the panels after installation: How to Care for WPC Decking: Cleaning and Colour.
Frequently asked questions
- What is the minimum order quantity for 01 WPC wall cladding? 100 m² per colour for wall cladding and decking; fencing is 50 sets.
- Are wall cladding samples free? Yes, samples are free. Request a sample first to confirm the colour and finish on the real panel before ordering in bulk.
- How long does delivery take? 15–25 days for one 20 ft container. Urgent orders can be confirmed case by case.
- How is 01 wall cladding fixed? Battens are fixed to the wall first with expansion anchors (nylon plug + screw). Panels are screwed at the seam — an A2 stainless steel screw through the tongue at the joint, one screw at every batten crossing; the next panel covers the screw heads. No clips are used. L skirting is screwed directly through the trim face.
- Can you customise the size, colour, pattern or logo? Yes. Mould design, size, length, packaging, colour, pattern, logo and sample boxes can all be customised.
- What is the difference between 01, 02 and 03 wall cladding? 01 is first-generation uncapped with post-embossed finishes (H1–H3). 02 is first-generation with a 3D embossed face. 03 is second-generation with a co-extruded cap layer. 01 and 02 share 10 standard colours; 03 has 8.

