222x23mm capped fluted WPC wall cladding panel, Custom colour, three wide ribs, face and end
WPC wall cladding capped colour card, 8 colours: Maple, Walnut, Black, Rosewood, Teak, Beige, Silver Grey, Antique
222x23mm capped fluted WPC wall cladding end section, hollow chambers and rib detail
222x23mm capped fluted WPC wall cladding panel, Silver Grey, face and end
219x26mm capped fluted WPC wall cladding panel, Custom colour, four narrow ribs, face and end
219x26mm capped fluted WPC wall cladding end section, chambers prominent
157x21mm capped flat WPC wall cladding panel, Walnut, face and end with tongue edge
2nd WPC Co-Extruded Decking

WPC Wall Cladding | 03 2nd Co-Extruded — T*Home

Wholesale capped WPC wall cladding, China manufacturer: 03 fluted 222/219 mm and flat 157/174 mm panels, 8 standard colours. MOQ 100 m² per colour, free samples, 15–25 days. Quote within 24 hours.

Specifications

Fluted, design 1 — 222 × 23 mm
Three wide ribs, capped face, hollow chambers, tongue-and-groove joint (Custom colour / Silver Grey)
Fluted, design 2 — 219 × 26 mm
Four narrow ribs, fine brushed texture, capped face, hollow chambers, tongue-and-groove joint (Custom colour)
Flat — 157 × 21 mm
Flat face, tongue-and-groove joint, end profile visible at the panel end (Walnut)
Flat — 174 × 21.5 mm
Two wide flat fields with a centre groove, capped face, tongue-and-groove joint (Golden Yellow / Bright Yellow)
Wholesale capped WPC wall cladding from a China manufacturer: second-generation panels with a co-extruded cap layer, in 222, 219, 174 and 157 mm, 8 standard colours. MOQ 100 m² per colour, free samples, 15–25 days per 20 ft container.

What is 03 2nd Co-Extruded WPC wall cladding?

Second-generation outdoor WPC wall cladding — wood plastic composite panels with a co-extruded (capped) surface layer — from ANHUI FENGZHIDA NEW MATERIAL TECHNOLOGY CO., LTD (T*Home), a China WPC manufacturer. Four profiles photographed so far: Fluted 222 × 23 mm with three wide ribs, Fluted 219 × 26 mm with four narrow ribs, Flat 157 × 21 mm, and Flat 174 × 21.5 mm with two wide flat fields and a centre groove. The 222 mm fluted panel is shown in Custom colour (not on the standard 8-colour card) and Silver Grey; the 219 mm fluted panel is shown in Custom colour; the 157 mm flat panel is shown in Walnut; the 174 mm flat panel is shown in Golden Yellow and Bright Yellow. Wall cladding is decorative, not load-bearing — it is fixed with screws at the panel joints, no clips.

Where can 03 wall cladding be used?

Exterior facades, garden walls and balcony walls where a capped surface is wanted on the face. For decking in the same range, see 03 WPC decking.

What colours and finishes are available?

Eight standard colours on the 03 colour card: Maple, Walnut, Black, Rosewood, Teak, Beige, Silver Grey, Antique. Online-embossed finishes for 03 (shared with 02): D1 Cloud Drift, D2 Cherrywood, D3 Wingwood, D4 Barkline, D5 Dragon Whisker, D6 Hewn Grain, D7 Fine Line, D8A Mountain Vein, D9 Water Ripple, D10 Willow Leaf, D11 B1, D12 Custom Made, D13 Aged Timber, D14 Bespoke; plus brushed finishes X2 Brushed Line and X3 Smooth Brushed. Custom colours are also available. The colours in the photos are Silver Grey, Walnut, Golden Yellow and Bright Yellow — the two yellows are the user's own colour names for the 174 mm flat panel, not on the standard 8-colour card — and custom colours. Confirm the colour and finish on a free physical sample before ordering in bulk.

How is 03 wall cladding installed?

Fix the battens to the wall first with expansion anchors (nylon plug + screw): drill through the batten into the wall, tap in the plug, drive the screw down. No panel goes on until the battens are fixed and level. Leave a ventilated cavity of at least 20 mm behind the panels, with a 10 mm gap at the bottom and top of the run. Panels are fixed with screws at the seam — drive an A2 stainless steel screw through the tongue at the joint into the batten, one screw at every batten crossing; the next panel slides over the tongue and covers the screw heads. No clips are used: wall cladding is decorative, not load-bearing, so screws at the seam are all it needs. Use silver screws on light panels and black screws on dark panels. Close the edges with L skirting, fixed with screws driven directly through the trim face. Full step-by-step instructions: T Home Wall Cladding Installation Guide.

How to choose between the four profiles?

Choose by profile first: Fluted 222 mm (three wide ribs, bold wood grain) or Fluted 219 mm (four narrow ribs, fine brushed texture) for a ribbed face; Flat 157 mm for a plain face; Flat 174 mm (two flat fields with a centre groove) for a wider flat face with a groove detail. All four fix the same way, screwed at the seam with no clips. Check the end-section photos before ordering battens, screws and trims.

What are the wholesale terms?

MOQ 100 m² per colour (decking and cladding). Samples are free. Lead time 15–25 days for a 20 ft container; urgent orders can be confirmed case by case. Custom mould design, size, length, packaging, colour, pattern, logo and sample boxes available. Payment 30% T/T deposit, 70% T/T before delivery; L/C also accepted. FOB / CIF / DDU / DDP from Shanghai, Qingdao or Ningbo. No prices on the page — quote on enquiry.

How to get a quote or free samples?

Send the model, colour and quantity and we will reply with a quote within 24 hours — or request free samples first and confirm the colour and finish on the real board before ordering in bulk. Contact: eva@thomestyle.com, WhatsApp / WeChat +86 15956288470. How to care for the panels after installation: How to Care for WPC Decking: Cleaning and Colour.

Frequently asked questions

  • What is the minimum order quantity for 03 WPC wall cladding? 100 m² per colour for wall cladding and decking; fencing is 50 sets.
  • Are wall cladding samples free? Yes, samples are free. Request a sample first to confirm the colour and finish on the real panel before ordering in bulk.
  • How long does delivery take? 15–25 days for one 20 ft container. Urgent orders can be confirmed case by case.
  • How is 03 wall cladding fixed? Battens are fixed to the wall first with expansion anchors (nylon plug + screw). Panels are screwed at the seam — an A2 stainless steel screw through the tongue at the joint, one screw at every batten crossing; the next panel covers the screw heads. No clips are used. L skirting is screwed directly through the trim face.
  • Can you customise the size, colour, pattern or logo? Yes. Mould design, size, length, packaging, colour, pattern, logo and sample boxes can all be customised. Custom colours are available.
  • What is the difference between 03, 01 and 02 wall cladding? 03 is second-generation: a co-extruded cap layer covers the panel surface. 01 and 02 are first-generation uncapped boards. 03 has 8 standard colours; 01 and 02 share 10. 03 shares the online-embossed and brushed finishes (D1–D14 and X2–X3) with 02; 01 uses post-embossed finishes (H1–H3). 03 Fluted comes in two designs: 222 × 23 mm with three wide ribs and 219 × 26 mm with four narrow ribs.

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.